Posts

Efficient optical technology from KDPOF for safe backbone in vehicles

KDPOF will give insight on “Automotive Communications Standards” at the IEEE Conference “Use of Standards in Industry: IoT, Robotics, Automotive, and Communications” on 20 April 2022 in Madrid, Spain. The IEEE event will discuss the importance of the different standards and their use and impact on the industry in different sectors such as automotive, communications, satellites, etc. In his presentation, Luis Manuel Torres, Principal Engineer at KDPOF and Editor-in-Chief of the IEEE 802.3cz standardization project “Multi-gigabit Optical Automotive Ethernet”, will give a general view of the most important automotive standards, with special emphasis on in-vehicle communication standards.

Read more

Display of High-speed Data Communications at IEEE SA Ethernet & IP @ Automotive Technology Day

KDPOF has displayed their high-speed connectivity solutions for the communications in vehicle data networks at the IEEE SA Ethernet & IP @ Automotive Technology Days from November 3 to 4, 2021 in Munich, Germany, and online. Optical connectivity perfectly solves the electrical challenges and interference in vehicles thanks to its low weight, low cost, and electromagnetic compatibility due to inherent galvanic isolation. Read more

Multi-gigabit Networking Demands Complete Optical Communications System - WEKA Bordnetz-Kongress 2021

At the virtual Wire Harness Congress (Bordnetz-Kongress) by WEKA Publishing on September 22, 2021, KDPOF displayed the status of optical multi-gigabit connectivity in vehicles. In their presentation, Juergen Schachtschneider, Automotive Manager Central Europe & Greater China, and César Esteban, Applications & Support Manager, proposed a complete optical communications system, which is under development by KDPOF and their industry partners.
Read more

KDPOF displays High-speed Data Communications at IEEE SA Ethernet & IP @ Automotive Technology Week

At the IEEE SA Ethernet & IP @ Automotive Technology Week from November 3 to 4, 2021 in Munich, Germany, and online, KDPOF will display their high-speed connectivity solutions for the communications in vehicle data networks. Optical connectivity perfectly solves the electrical challenges and interference in vehicles thanks to its low weight, low cost, and electromagnetic compatibility due to inherent galvanic isolation.

Read more

At the virtual Wire Harness Congress on September 22, 2021, KDPOF will inform about the status of Optical Multi-gigabit Connectivity in vehicles. In their presentation at 11:45, Juergen Schachtschneider, Automotive Manager Central Europe & Greater China, and César Esteban, Applications & Support Manager, will propose a complete optical communications system, which is under development by KDPOF and their industry partners. Read more

KDPOF is looking forward to participating in the upcoming virtual ISCAS 2020 from October 10 to 21 with several contributions: a presentation on multi-gigabit Ethernet for the automotive industry, an overview lecture on high-speed data communications over POF, and an important role in the final industry panel session. The IEEE International Symposium on Circuits and Systems (ISCAS) is the flagship conference of the IEEE Circuits and Systems (CAS) Society and the world’s premiere networking forum for researchers in the highly active fields of theory, design, and implementation of circuits and systems.

Presentation: Towards the Multi-Gigabit Ethernet for the Automotive Industry

On Tuesday, October 13, 2020, from 17:15 to 18:55, session Chairmen Enrique Prefasi Sen, Analog and Mixed Signal Senior Designer of KDPOF, and Alberto Rodríguez-Pérez, Analog and Mixed Signal Manager of KDPOF, will present the paper “Towards the Multi-Gigabit Ethernet for the Automotive Industry”. The paper, within the special session “Multi-gigabit Wireline & Optical Communication Circuits & Systems Session”, will show the status of Ethernet-based communication solutions, focused on optical links for the automotive industry. First, the presenters will display the implementation of a product compatible with the 1000BASE-RHC according to the IEEE Std 802.3bv, which is the first one able to transmit 1 Gbps over POF for automotive. Second, the KDPOF experts will describe a new architecture to achieve up to 25 Gbps for automotive. The proposed multi-gigabit system leverages existing technologies such as VCSELs, multi-mode fibers, and photodiodes already developed for the data center industry.

Lecture: High-Speed Data Communications over Plastic Optical Fibers

Alberto Rodríguez-Pérez will give an overview lecture on Saturday, October 17, 2020, from 16:00 to 16:45 in virtual room 2. In his lecture, Alberto will show an overview of the use of Plastic Optical Fiber as a medium for optical data communications and the techniques needed to get high speed data bitrates over POF. It is an interesting alternative optical communication channel to the Glass Optical Fibers (GOF) for applications that are not required to cover long distances, such as home or automotive networking. However, the reduced low bandwidth of the POF channel imposes big limitations in the maximum data bitrate that can be transmitted through this medium. Consequently, advanced data communication techniques such as channel equalization, data error correction, or data signal modulation need to be applied to achieve data bitrates above 1 Gbps.

Industry Panel

KDPOF is also substantially involved in the final Industrial Panel Discussion on Wednesday, October 21, 2020, from 16:45 to 17:45. Alberto Rodríguez-Pérez will chair the panel and Rubén Pérez de Aranda, CTO of KDPOF, will participate as panelist.

Aukua Systems Inc., provider of Ethernet test and monitoring solutions, and KDPOF are proud to announce the success of their technology partnership for ISO 21111 standardization. Recently, two additional sections, ISO 21111-3:2020 and ISO 21111-5:2020, of the international in-vehicle Ethernet ISO standard series 21111 have been published. “By providing their MGA2510 Ethernet Test and Monitoring Platform, Aukua Systems have supremely equipped the test setup for ISO certification,” stated Carlos Pardo, CEO and Co-founder of KDPOF.

Successful Technology Partnership Results in ISO Standard for Optical In-Vehicle Gigabit Connectivity

Suds Rajagopal is Co-Founder of Aukua Systems

Suds Rajagopal is Co-Founder of Aukua Systems

KDPOF supports the test ecosystem to make sure that ECUs including their technology will be tested by recognized test houses and based on the ISO standard. “We are delighted to support the overall standard for optical gigabit connectivity in vehicles with ISO 21111 complementing the existing IEEE Std 802.3bvTM,” added Suds Rajagopal, Co-Founder at Aukua Systems. “By leveraging Aukua’s test solutions, carmakers and Tier1s now have access to a complete, compatible, and interoperating implementation based on these standards.”

ISO 21111 Standardization

For reliable implementations of systems that implement in-vehicle Ethernet Optical 1 Gb/s as a physical layer, International Organization for Standardization (ISO) has added two new sections to the in-vehicle Ethernet series 21111: ISO 21111-3:2020 specifies additional features to IEEE 802.3bv, such as wake-up and synchronized link sleep algorithms. ISO 21111-5:2020 specifies requirements at the system level and a complete conformance and interoperability test plan for ECU providers that implement optical 1 Gb/s physical layer as specified in ISO 21111-3.

About Aukua Systems
Aukua Systems Inc. is a leading provider of Ethernet testing and visibility solutions. Whether developing, validating, deploying, supporting or managing applications or networks, their products help improve performance and make networks more secure. The Aukua product line includes packet capture tools, analyzers, traffic generators, and impairment emulators. Since 2015, equipment manufacturers, semiconductor companies, automotive OEMs and Tier1’s, large enterprises, service providers, and government agencies worldwide have depended on Aukua to build stronger networks.

KDPOF welcomes the publication of two additional standards in the frame of the international in-vehicle Ethernet ISO standard series 21111. The supplementary parts, ISO 21111-3:2020 and ISO 21111-5:2020, specify further features for in-vehicle data transmission of 1 Gigabit per second over POF technology. “With the new ISO 21111 sections complementing the existing IEEE Std 802.3bvTM, optical Gigabit connectivity is now entirely standardized,” explained Carlos Pardo, CEO and Co-founder of KDPOF. “Based on these standards, our optical technology allows a complete, compatible, and interoperating implementation for carmakers and Tier1s.”

Publication of ISO 21111

ISO (International Organization for Standardization) has added two new sections to the in-vehicle Ethernet series 21111. These newly approved parts are key components to assure reliable implementations of systems that realize in-vehicle Ethernet Optical 1 Gb/s as a physical layer.

ISO 21111-3:2020 specifies additional features to IEEE 802.3bv, such as wake-up and synchronized link sleep algorithms. It also contains a complete conformance test plan for IC providers that implement this standard.

ISO 21111-5:2020 specifies requirements at the system level and a complete conformance and interoperability test plan for ECU providers that implement optical 1 Gb/s physical layer as specified in ISO 21111-3.

Further relevant parts of ISO 21111 for this type of high speed in-vehicle communications include:

  • ISO 21111-1 provides general definitions.
  • ISO 21111-2 defines general wake-up and sleep definitions and RGMII specifications.
  • ISO 21111-4:2020 is devoted to optical connectivity component specification and tests.