Posts

KDPOF welcomes proposed IEEE optical multi-gigabit automotive Ethernet standard 802.3 achieving milestone

At the 30th International Conference for Plastic Optical Fibers, POF 2022, from September 26 to 28, 2022 in Bilbao, Spain, César Esteban will present “The Optical In-vehicle Network” on Monday, September 26, at 10:45. Following an update on the latest achievements and an outlook to future technology, he will also address traditional concerns about optical in automotive, including: cost, cable bending radius, vibrations, mechanical stress (tension, torsion, dynamic cycling), temperature, dirty environment, and port dimensions (PCB area and area of the optical header on the ECU front panel).

Read more

KDPOF designs first optical 1000BASE-RH SFP module

KDPOF has developed and validated the first 1000BASE-RH SFP module for optical gigabit connectivity in vehicles. The design of the new small form-factor pluggable transceiver module is based on a standard SFP supporting MSA registers via I2C bus. The module can operate at 100 and 1,000 Mb/s. It integrates the whole 1000BASE-RHC PHY and the header connector for SI-POF optical harness. “Our new SFP module has been tested and validated in a functional demo recently,” stated Carlos Pardo. “We are proud to accomplish the first milestone for future commercial optical 1000BASE-RH SFP modules, which will integrate into the optical ecosystem in automotive.”

Read more

KDPOF's integrated KD9351 FOT has been nominated for Electronics Industry Awards 2022

KDPOF celebrate their integrated KD9351 FOT being nominated for Electronics Industry Awards 2022. “We are proud to be one of the finalists in the automotive category,” stated Carlos Pardo. “With the KD9351 FOT, we consequently provide efficient optical technology for safe backbone and ADAS sensor links in vehicles. We significantly lower costs by constructing the transimpedance amplifier, photodiode, LED driver, and LED as one single device.” The integrated device provides enhanced efficiency and flexibility, thus paving the way to optical multi-gigabit Ethernet in the vehicle. Until August 25, 2022, readers are called to vote for their favorite electronics products.

Read more

Extensive evaluation kit EVK9351AUT from KDPOF eases project start for optical gigabit connectivity in vehicles

KDPOF presents the new extensive evaluation kit EVK9351AUT for a quick and easy project launch of optical gigabit connectivity in vehicles. “Our new EVK9351AUT equips carmakers, suppliers, and test houses to fully evaluate the KDPOF automotive transceivers KD9351 and KD1053 for automotive optical 1000BASE-RHC PHY implementation,” explained Carlos Pardo, CEO and Co-founder of KDPOF. “We thus support our recently announced new integrated KD9351 Fiber Optic Transceiver (FOT) for comprehensive evaluation.” Read more

KDPOF proudly announces that Funzin, software development and edge AI solution company, have integrated their KD1053 IC and integrated KD9351 FOT (fiber optic transceiver) in the new Funzin AIoT Platform “FAIP 3.0” and Edge AI Device “Photon” for automotive. “An automated driving car requires networks capable of controlling and processing a great deal of sensor data,” explained Ms. Deuk Hwa Kim, CEO/President of Funzin. “Our automotive network solution features an Ethernet backbone environment based on plastic optical fiber (POF) to eliminate electronic wave interference.” Read more

Efficient optical technology from KDPOF for safe backbone in vehicles

On August 13, 2021 from 11:00 a.m. to 12:30 p.m. IST (Indian Standard Time, 6:00 to 7:30 a.m. UTC), Óscar Ciordia, César Esteban, and Kenny Yoon will give the online seminar “The Use of Plastic Optical Fiber in the Automotive Industry”. The seminar is organized by the Society of Automotive Engineers India (SAE India). Read more

Carlos Pardo is CEO and Co-founder of KDPOF

For BlastingTalks – Blasting News’ exclusive interviews with business and cultural leaders – Carlos Pardo has given an interview about KDPOF’s alternative to traditional fiber optics that allows for use in harsh environments and requires no technical expertise to install: Read more

KDPOF is looking forward to participating in the upcoming virtual ISCAS 2020 from October 10 to 21 with several contributions: a presentation on multi-gigabit Ethernet for the automotive industry, an overview lecture on high-speed data communications over POF, and an important role in the final industry panel session. The IEEE International Symposium on Circuits and Systems (ISCAS) is the flagship conference of the IEEE Circuits and Systems (CAS) Society and the world’s premiere networking forum for researchers in the highly active fields of theory, design, and implementation of circuits and systems.

Presentation: Towards the Multi-Gigabit Ethernet for the Automotive Industry

On Tuesday, October 13, 2020, from 17:15 to 18:55, session Chairmen Enrique Prefasi Sen, Analog and Mixed Signal Senior Designer of KDPOF, and Alberto Rodríguez-Pérez, Analog and Mixed Signal Manager of KDPOF, will present the paper “Towards the Multi-Gigabit Ethernet for the Automotive Industry”. The paper, within the special session “Multi-gigabit Wireline & Optical Communication Circuits & Systems Session”, will show the status of Ethernet-based communication solutions, focused on optical links for the automotive industry. First, the presenters will display the implementation of a product compatible with the 1000BASE-RHC according to the IEEE Std 802.3bv, which is the first one able to transmit 1 Gbps over POF for automotive. Second, the KDPOF experts will describe a new architecture to achieve up to 25 Gbps for automotive. The proposed multi-gigabit system leverages existing technologies such as VCSELs, multi-mode fibers, and photodiodes already developed for the data center industry.

Lecture: High-Speed Data Communications over Plastic Optical Fibers

Alberto Rodríguez-Pérez will give an overview lecture on Saturday, October 17, 2020, from 16:00 to 16:45 in virtual room 2. In his lecture, Alberto will show an overview of the use of Plastic Optical Fiber as a medium for optical data communications and the techniques needed to get high speed data bitrates over POF. It is an interesting alternative optical communication channel to the Glass Optical Fibers (GOF) for applications that are not required to cover long distances, such as home or automotive networking. However, the reduced low bandwidth of the POF channel imposes big limitations in the maximum data bitrate that can be transmitted through this medium. Consequently, advanced data communication techniques such as channel equalization, data error correction, or data signal modulation need to be applied to achieve data bitrates above 1 Gbps.

Industry Panel

KDPOF is also substantially involved in the final Industrial Panel Discussion on Wednesday, October 21, 2020, from 16:45 to 17:45. Alberto Rodríguez-Pérez will chair the panel and Rubén Pérez de Aranda, CTO of KDPOF, will participate as panelist.

Portfolio Items