Posts

César Esteban is Applications and Support Manager at KDPOF

César Esteban from KDPOF, in his technical workshop at the Wire Harness Congress on September 20, 2022 at 15:30 in Landshut, Germany, will display the benefits of optical communications for the in-vehicle network.

As the challenges of multi-gigabit increase, costs should not increase at the same scale. Optical provides a low-cost, robust, and reliable solution for the in-vehicle wiring system. Optical’s EMC superior performance prevents the need for heavy, bulky, expensive cables with rigid and age-prone shielding. The inherent galvanic isolation of optical fiber solves the ground loop issues and the return currents through cable shielding. Read more

INNOVA ICAI Forum: Talk with Carlos Pardo about Future Automotive Connectivity

On September 29, 2022 at the INNOVA ICAI Forum in Madrid, Carlos Pardo will speak about “Towards the connectivity of the future in the automotive sector”. In the interview with Javier Villacampa, Innovation Director of Grupo Antolin, Carlos Pardo will discuss the connectivity of the future in the automotive sector and the role of KDPOF in these major changes.

Read more

KDPOF designs first optical 1000BASE-RH SFP module

KDPOF has developed and validated the first 1000BASE-RH SFP module for optical gigabit connectivity in vehicles. The design of the new small form-factor pluggable transceiver module is based on a standard SFP supporting MSA registers via I2C bus. The module can operate at 100 and 1,000 Mb/s. It integrates the whole 1000BASE-RHC PHY and the header connector for SI-POF optical harness. “Our new SFP module has been tested and validated in a functional demo recently,” stated Carlos Pardo. “We are proud to accomplish the first milestone for future commercial optical 1000BASE-RH SFP modules, which will integrate into the optical ecosystem in automotive.”

Read more

KDPOF welcomes proposed IEEE optical multi-gigabit automotive Ethernet standard 802.3 achieving milestone

At the The Future of Mobility event, hosted by STMicroelectronics and Plug and Play from September 12 to 13, 2022 in Catania, Italy, KDPOF CEO Carlos Pardo will present an outlook for optical connectivity in intelligent vehicles. With this event, STMicroelectronics and Plug and Play are driving open innovation to the next level by bringing together the mobility industry leaders, OEMs and suppliers. “At KDPOF, we’re proud to participate in exploring the future of mobility at this leading industry event for automotive innovations,” stated Carlos Pardo. “We’re excited to show more about our future projects and, especially, our core and corporate culture.” Read more

Integrated KD9351 FOT for automotive gigabit connectivity

Extreme technology, billions of euros and rooms that are much cleaner than those in an operating theater. This is how a microchip is manufactured.

Toñi Fernández from the Spanish radio station Cadena Ser has spoken with KDPOF CEO Carlos Pardo about the plans to set up a semiconductor packaging plant in the Madrid area. As follows, please see the translated summary of the Spanish audio. Read more

KDPOF's integrated KD9351 FOT has been nominated for Electronics Industry Awards 2022

KDPOF celebrate their integrated KD9351 FOT being nominated for Electronics Industry Awards 2022. “We are proud to be one of the finalists in the automotive category,” stated Carlos Pardo. “With the KD9351 FOT, we consequently provide efficient optical technology for safe backbone and ADAS sensor links in vehicles. We significantly lower costs by constructing the transimpedance amplifier, photodiode, LED driver, and LED as one single device.” The integrated device provides enhanced efficiency and flexibility, thus paving the way to optical multi-gigabit Ethernet in the vehicle. Until August 25, 2022, readers are called to vote for their favorite electronics products.

Read more

Carlos Pardo presents "Automotive Multi-gigabit is Optical" at Automotive Ethernet Congress 2022

At the Automotive Ethernet Congress in June 2022 in Munich, Germany, Carlos Pardo gave the presentation “Automotive Multi-gigabit is Optical”. He showed how automotive optical Ethernet is reaching for 50 Gb/s.

YouTube

By loading the video, you agree to YouTube's privacy policy.
Learn more

Load video

Read more

Automotive Ethernet Congress: Automotive Multi-gigabit is Optical

With new challenges like automated driving and electric power trains, In-Vehicle Network (IVN) requirements are quickly evolving. The IVN has to support use cases such as the vehicle data backbone, smart antennas, ADAS cameras/sensors, displays, and data loggers, which demand higher data bandwidth while maintaining the reliability level required by the automotive industry. When considering a standard technology to support the target use cases, it is clear that the requirements are not all met by any existing communication standard, including the optical 10GBASE-SR. It is thus necessary to define a new IVN standard for multi-gigabit optical communications in the automotive environment.

Read more

VECS: KDPOF celebrated Proposed IEEE Optical Multi-gigabit Automotive Standard Achieving Milestone

At the recent VECS 2022 – Vehicle Electronics & Connected Services – International Trade Show from May 17 to 18, 2022 in Gothenburg, Sweden, KDPOF has celebrates the in-vehicle network standardization progress reaching the IEEE 802.3 Working Group Ballot stage. “We are happy that the IEEE 802.3cz automotive optical multi-gigabit technically complete standard draft has entered the Working Group ballot stage,” stated Carlos Pardo, KDPOF CEO and active participant in the IEEE 802.3 working group. Read more

KDPOF welcomes proposed IEEE optical multi-gigabit automotive Ethernet standard 802.3 achieving milestone

KDPOF congratulates the 802.3cz Task Force for the advance of the proposed IEEE 802.3cz standard to the IEEE 802.3 Working Group ballot stage. “We are happy that the IEEE 802.3 automotive optical multi-gigabit technically complete standard draft has entered the Working Group ballot stage,” stated Carlos Pardo, KDPOF CEO and active participant in the IEEE 802.3 working group. Read more